EN
Solar panels are a great means by which you are saving your money and also helping the environment. They gain energy from the sun which then can be used to operate appliances and devices within residential homes and commercial businesses.
Part 1: Why Are Panel Angles Important
The very first consideration on the day of your solar panel installation is probably what angle your solar panels are installed at. The angle actually is very crucial because solar panel efficiency operate at their best when they face the sun directly. What that means is that depending on your location your panels may be at a different angle.
So for instance if you stay in a sunny state like Arizona or Texas your panels would be tilted up high to get as many rays of sunlight as possible. However if you stay in a less sunny area like the Pacific Northwest you might want to tilt those panels a little steeper to get as much sun as you can.
Finally ensure that your solar panels are not in any way shadowed as nothing should come between the light and the solar panel this includes trees and buildings. Try to scan your surroundings before installing any of your panels to assess the possible shade that may influence your angle.
Part 2: Different Methods To Install Panels On Different Types Of Roofs
The process of mounting solar panels on a roof however varies based on the type of roof you have when you are ready for it. This matters because not every type of roof needs the same installation method.
For those who have a roof with asphalt shingles the process will be relatively simple. The bifacail solar panel can be mounted directly onto the roof with brackets that attaches to the roof trusses. This helps to allow everything to stay stable and secure out there.
Installation might be a little complicated because of the metal roof. That makes walking on top of a metal roof a little dodgy because they can be some slick buggers. That is why you should always hire an expert in mount and installing solar panels on metal roofs. They will know all of the best installation methods and how to secure your panels safe and sound.
If your roof is tiled you will need to exercise even greater caution. Tile roofs are fragile breaking easily if proper materials aren't used during installation. This time it is critical to get a qualified professional specifically one that knows tile roofs. They will know how to install your panels without damaging the roof.
Part 3: Where Is the Best Place for Your Solar Panels
There are many important things to consider when choosing a location for your solar panels. To begin with you want to ensure that you have south-facing panels. This orientation system makes sure that your panels are in the sunshine for the majority of the day.
Another step is to choose a spot where you are not shaded by tree or building nearby. For your panels to do their job they need to be erected somewhere they receive at least 6 hours of sunlight per day.
Lastly consider how accessible your panels will be. It is best to select an area that you can clear because you will have to clean your panels quite often.
Part 4: Maintenance of Solar Panels
Here are some very important tips on how to take care of your solar panels. First of all you should clean your panels. These panels may get covered with dust that may make it difficult for sunlight to reach them.
Part 5: Installing Your Solar Panels
This is a short guide to walk you through the solar panel installation process:
First find a location for your panels that is sunny and accessible.
Then install brackets to hold the panels firmly.
Install rails that will support the panels.
Then hold the panels to the ends of the rails and fix them right.
Then you can connect the panels to an inverter. Since the panels are producing DC electricity an inverter is a very important part in converting that energy into AC current. That you would then use to power your house.
The inverter is then connected to the electrical system inside your house.
Installing solar panel companies on your rooftop can be an excellent way to cost save money and contribute to saving the earth. But they have to be done properly to work efficiently and give you maximum energy output.